Customized industrial ovens and furnaces built based on your condition and specifications. Custom
designed and manufactured for processes that never existed before, and
our machines are borned with heats recycling system to reduce energy consumption.
Customizable size, Electrical Infrared Heating with multi-function. Fast curing, around 5m/s. Film curing from both sides. This is an oven for Norway
The powder is sprayed on the metal surface for insoluation purpose. After the powder spray, the roll get into the oven, heated by infrared oven.
Control of the IR lamps
Every two tube will be a heating unit and controlled independently, for a precisely temperature range.
Adjustment of the IR lamps
The height of the fixture of IR lamps is adjustable, and height of each lamp is adjustable, to heat evenly.
Infrared lamps
Customized lamps size. Double tubes with golden coating to provide more heat.
As an industrial drying equipment, the heating chamber of the tunnel oven is made from SS. Thick insolution material to avoid heat escape and protect operator. The surface temperature of the oven will be less than rm+15℃
|
Product Process |
1. Coil continuously passes through the red hot channel, with a maximum speed of 5m/min 2. Product surface temperature: ≤170℃ 3. The product is coil coated both sides, width 1500mm, with thickness 1.25mm |
|
Outer dimension |
W1800*L2700*H700mm |
|
Temperature range |
R.t. ～+250℃, adjustable |
|
Accuracy |
£±1℃ |
|
Temperature Uniformity |
£±3℃(empty or Constant temperature state ) |
|
Outer shell temperature |
The temperature shall not exceed +15°C of the ambient temperature, except around the doors. |
|
Air Recirculation |
Direct heating by infrared lamps on both sides |
|
Power source |
3phase 5 core, 400V, 50Hz |
|
Total power |
Around 170KW |
|
Material |
Made of 1.5mm SUS304 stainless steel plate, it keeps the inner tank clean, dust-free, rust-proof, corrosion-resistant, and easy to clean. Full welded. |
|
Oven Body |
The internal frame of the oven body is made of 50*50*3mm angle steel to maintain the bearing strength of all surfaces inside and outside the box, and retain the thermal expansion and contraction coefficient to prevent the box from deformation. |
|
Insulation material |
Adopted 100K thickened aluminum silicate wool, It has the characteristics of non-combustible and strong heat insulation, thickness is 90mm and with 10mm aerogel |
|
Maintenance door |
One side open maintenance with safety limiting rod and safety lock, if the temperature is too high, the oven can’t be oven |
|
Open for coil |
1. Adjustable board, for coil for pass through 2. In side of the outlet, a high temperature IR monitor, to monitor the surface temperature of Coil |
|
Installation and mounting |
To reserve the position for installation and mounting, the position and method should be confirmed while production design |
|
Control Cabinet |
1. Independent Rittal cabinet 2. Cabinet with fans 3. The cable will be pass through the flexible tube, reserved length is around 6meters |
|
IR lamp |
1. Adopt semi-gold-plated short-wave infrared heating tube, around 28 IR lamps, each lamp around 6kw 2. The chamber is equipped with infrared lamps on the top and bottom to ensure that the product is fully illuminated 3. Schneider SSR controller. 4. The height of IR tube installation frame is adjustable |
|
Control system |
1. Siemens KTP700 HMI and S7-1200PLC 2. Delta temperature controller is used to control the temperature, with 485 communications 3. The temperature module controls the PV and SV temperature, and the PID automatically adjusts the control output 4. The program language is Chinese and English |
|
Exhausting Fan |
If necessary, one set of 0.37KW exhausting fan is installed, with converter |
If you have any questions about the subscription or are not sure which plan is right for you, contact our team and let’s schedule a call.
+8613771727936
